The Drager PointGard® 2000 series is a self-contained gas detection system for the continuous area monitoring of toxic or flammable gases in ambient air. PointGard® 2000’s rugged, water-resistant enclosure comes complete with a horn and strobes, a built-in power supply, and reliable DragerSensor®.
Ready to use out of the box
PointGard 2000 is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hardwire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The precalibrated sensor is ready to use.
Drager PointGard 2100: Detect over 100 toxic gases using DragerSensors
Electrochemical DragerSensors provide continuous detection even under the harshest conditions. Most Dra?gerSensors offer a very wide temperature and humidity range from -40°C to +65°C (-40°F to +149°F). The built-in memory contains all calibration and configuration information. Therefore the sensor chips precalibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.
Drager PointGard 2200: Fast and stable combustible-gas detection
The latest-generation CatEx DD gas sensor is based on the proven catalytic bead principle. Innovative dual active elements result in very good long-term zero stability. Drager has raised the bar yet again for poison resistance. The resulting long service life provides you with low ownership costs. Measuring performance has also been improved. The innovative gas inlet allows the sensor to respond to gas within a matter of seconds.
PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.
Rugged and compact housing
PointGard’s glass-fiber-reinforced polyester housing is water- and dust-resistant with a 4X/IP66 rating. Its compact size allows it to easily fit most applications. Built-in cable glands make it easy to install.
Advanced display with diagnostics
The large, illuminated graphic backlit display shows status information clearly and in an easy-to-use format. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and graphed on the display.